Aller au contenu principal

Introduction

Use this guide to open up your speaker and remove and replace different components under the front panel.

Pièces

Aucune pièce spécifiée.

  1. Before continuing, be sure your device is powered off.
    • Before continuing, be sure your device is powered off.

    • Remove two 9mm Phillips #0 head screws from the bottom side of the speaker.

  2. Peel back the rubber feet from either side of the base.
    • Peel back the rubber feet from either side of the base.

  3. Remove four 9mm Phillips #0 head screws from the bottom of the speaker.
    • Remove four 9mm Phillips #0 head screws from the bottom of the speaker.

  4. Separate the base of the speaker from the upper housing.
    • Separate the base of the speaker from the upper housing.

  5. Remove four 9mm Phillips #0 head screws from the inside of the speaker case.
    • Remove four 9mm Phillips #0 head screws from the inside of the speaker case.

  6. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard. Remove all cable connectors from the speaker motherboard.
    • Remove all cable connectors from the speaker motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Lennon

Membre depuis le 14/04/2015

9 542 Réputation

10 tutoriels rédigés

Équipe

Cal Poly, Team 4-5, Maness Spring 2015 Membre de l'équipe Cal Poly, Team 4-5, Maness Spring 2015

CPSU-MANESS-S15S4G5

4 membres

29 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 4

Total : 356