Aller au contenu principal

Pioneer Elite PRO-RO6U Cooling Fan Replacement

Ce dont vous avez besoin

  1. Pioneer Elite PRO-RO6U Cooling Fan Replacement, Power Supply Cooling Fan: étape 1, image 1 de 1
    • Remove the two 6.4 mm Phillips screws on each side of the device's casing.

  2. Pioneer Elite PRO-RO6U Cooling Fan Replacement: étape 2, image 1 de 1
    • Remove the two 6.5 mm Phillips screws on the back of the device casing.

  3. Pioneer Elite PRO-RO6U Cooling Fan Replacement: étape 3, image 1 de 1
    • Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

  4. Pioneer Elite PRO-RO6U Cooling Fan Replacement: étape 4, image 1 de 1
    • To replace the back cooling fan, grip the ribbon connector at slot M10 and remove by gently pulling upward.

  5. Pioneer Elite PRO-RO6U Cooling Fan Replacement: étape 5, image 1 de 1
    • Remove the two 6.5 mm Phillips mounting screws at the back of the device.

  6. Pioneer Elite PRO-RO6U Cooling Fan Replacement: étape 6, image 1 de 1
    • Grip the frame of the cooling fan and slide away from the back wall until the tabs are no longer in the holes of the casing.

    • Lift the cooling fan out of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cody Carter

Membre depuis le 01/30/18

1 049 Réputation

6 tutoriels rédigés

Équipe

Baylor, Team S1-G5, Johnson Spring 2018 Membre de l'équipe Baylor, Team S1-G5, Johnson Spring 2018

BU-JOHNSON-S18S1G5

3 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 589