Réparez vos affaires Communauté Boutique

Pioneer MXT-X366BT Metal Case Replacement

Introduction

This guide shows how to replace the metal sleeve on the Pioneer MXT-X366BT. This guide can act as a prerequisite for replacing the internal components of the radio, although the metal sleeve is also available as a replacement part.

Note: The radio must be removed from the vehicle for this guide. If the radio is currently installed in the vehicle, removal may require special assistance.

Ce dont vous avez besoin

  1. Pioneer MXT-X366BT Metal Case Replacement, Metal Casing: étape 1, image 1 de 2 Pioneer MXT-X366BT Metal Case Replacement, Metal Casing: étape 1, image 2 de 2

    • Apply small amount of pressure inward with a plastic opening tool to release bottom clip.

    • Pry the top clip with the plastic opening tool to release it.

    • The head unit is symmetrical and has the same amount of clips on the other side.

    Modifier

  2. Pioneer MXT-X366BT Metal Case Replacement: étape 2, image 1 de 1

    • Remove the face plate holder.

    Modifier

  3. Pioneer MXT-X366BT Metal Case Replacement: étape 3, image 1 de 1

    • Remove the six 5mm Phillips-head screws with Philips #2 screwdriver.

    Modifier

  5. Pioneer MXT-X366BT Metal Case Replacement: étape 4, image 1 de 2 Pioneer MXT-X366BT Metal Case Replacement: étape 4, image 2 de 2

    • Remove the inner three 5mm Phillips head screws, with a Phillips #2 screwdriver, attached to the metal backing.

    • Remove the metal backing that is now free.

    Modifier

  6. Pioneer MXT-X366BT Metal Case Replacement: étape 5, image 1 de 1

    • Carefully slide the metal casing forward.

    • Metal piece standing is the rear of the head unit.

    • Edges are sharp.

    Modifier

  7. Pioneer MXT-X366BT Metal Case Replacement: étape 6, image 1 de 1

    • Lift the metal casing from the rear and pull it away.

    • Edges are sharp.

    Modifier

  8. Pioneer MXT-X366BT Metal Case Replacement: étape 7, image 1 de 1

    • The metal casing is now fully removed.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 2 autres contributeurs

Blaine Kaiser

Membre depuis le 03/22/18

169 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

Équipe

Sam Houston State, Team S17-G7, Blackburne Spring 2018 Membre de l'équipe Sam Houston State, Team S17-G7, Blackburne Spring 2018

SHSU-BLACKBURNE-S18S17G7

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 10

Total : 281