Introduction

Use this guide if your macroline or regulator broke or you chose to upgrade your regulator. Removing these parts also allows access to more of the marker's internal parts.

Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.
  • Firmly grasp hold of the ring on the bottom of the 90 degree silver fitting on the front of the gun.

  • Pull hard, but slowly, on the macroline where it comes out of silver piece until it comes out.

  • The macroline is the black hose connecting the regulator to the tank connection.

Ajouter un commentaire

Remove the regulator by unscrewing it in a clockwise direction.
  • Remove the regulator by unscrewing it in a clockwise direction.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Jared Olson

Membre depuis le 14/10/2014

205 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 10-42, Amido Fall 2014 Membre de l'équipe Cal Poly, Team 10-42, Amido Fall 2014

CPSU-AMIDO-F14S10G42

5 membres

7 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 716