Aller au contenu principal

Introduction

Planet Eclipse Geo3 Battery Replacement

Outils

Pièces

  1. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side. Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.
    • Remove the four screws from the grip with the 5/64" allen wrench. There are two on each side.

  2. Pull the grip away from the frame. Pull the grip away from the frame.
    • Pull the grip away from the frame.

  3. Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now

    Fix Kits pour batterie de MacBook

    À partir de $69.99

    Buy Now
  4. Pull the grip through the opening. The grip is connected in the middle and is one piece.
    • Pull the grip through the opening.

    • The grip is connected in the middle and is one piece.

  5. Push out top of battery from left side of grip. Push out top of battery from left side of grip.
    • Push out top of battery from left side of grip.

  6. Push new battery into right side of grip, inserting the bottom first.
    • Push new battery into right side of grip, inserting the bottom first.

    • Be sure to match the signs of the battery and the terminals. The terminals are labeled just above the battery on the right side.

Conclusion

To reassemble your device, follow the Disassembling Planet Eclipse Geo3 Grip in reverse.

Une autre personne a terminé cette réparation.

Rett Triplett

Membre depuis le 18/10/2013

801 Réputation

8 tutoriels rédigés

Équipe

Clemson, Team 13-6, Benson Fall 2013 Membre de l'équipe Clemson, Team 13-6, Benson Fall 2013

CLEM-BENSON-F13S13G6

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 3

Total : 595