Pièces

Aucune pièce nécessaire.

  1. Remove all five screws on the downside of the PS2 Slimline Remove the "Do not void" seal carefully, underneath is the fifth screw located. Remove the "Do not void" seal carefully, underneath is the fifth screw located.
    • Remove all five screws on the downside of the PS2 Slimline

    • Remove the "Do not void" seal carefully, underneath is the fifth screw located.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Make sure all screws are removed Caution with the seal, do not forget.
    • Make sure all screws are removed

    • Caution with the seal, do not forget.

    • Then take a metal sponger and open the chassis

  4. Locate the battery on the motherboard Use a metal spunger to peel it up Pull the cable and the battery is removed, ready to replace
    • Locate the battery on the motherboard

    • Use a metal spunger to peel it up

    • Pull the cable and the battery is removed, ready to replace

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

tlroesner

Membre depuis le 13/05/2012

1 788 Réputation

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 7

30 derniers jours : 41

Total : 8,414