Réparez vos affaires Communauté Boutique

PlayStation 2 Slimline IR Sensor Replacement

Introduction

This guide will show you how to locate and replace the Infrared Sensor in the Playstation 2 Slimline. The IR sensor reads wireless signals so PS2 controllers and remotes function as if they were plugged into the unit.

Ce dont vous avez besoin

  1. PlayStation 2 Slimline IR Sensor Replacement, Outer Shell: étape 1, image 1 de 1

    • Disconnect all cables from the console and flip the unit over to reveal its base.

    Modifier

  2. PlayStation 2 Slimline IR Sensor Replacement: étape 2, image 1 de 3 PlayStation 2 Slimline IR Sensor Replacement: étape 2, image 2 de 3 PlayStation 2 Slimline IR Sensor Replacement: étape 2, image 3 de 3

    • Locate the 6 feet on the base of the unit. Pry them off using a spudger to reveal the screws.

    • Note: One of the feet is located under the sticker shown in the photo. Removing this sticker will void any warranty with Sony.

    Modifier

  3. PlayStation 2 Slimline IR Sensor Replacement: étape 3, image 1 de 3 PlayStation 2 Slimline IR Sensor Replacement: étape 3, image 2 de 3 PlayStation 2 Slimline IR Sensor Replacement: étape 3, image 3 de 3

    • Remove all six 4.0 mm screws from the base of the unit using a #1 Phillips screwdriver.

    Modifier

  5. PlayStation 2 Slimline IR Sensor Replacement: étape 4, image 1 de 3 PlayStation 2 Slimline IR Sensor Replacement: étape 4, image 2 de 3 PlayStation 2 Slimline IR Sensor Replacement: étape 4, image 3 de 3

    • Starting at the corner at which the power and Ethernet ports are located, pry open the outer shell using a spudger and continue around the entire unit.

    • Note: You may use your hands for additional force to separate the two pieces of the outer shell.

    Modifier

  6. PlayStation 2 Slimline IR Sensor Replacement, IR Sensor: étape 5, image 1 de 1

    • Locate the IR sensor at the front, right corner of the unit.

    Modifier

  7. PlayStation 2 Slimline IR Sensor Replacement: étape 6, image 1 de 1

    • Gently detach the ribbon cable connecting the IR sensor to the motherboard.

    • Caution: Always remove ribbon cables by the plastic handles located on either end. Gripping a ribbon cable anywhere but the provided handles can damage the cable and render the component useless.

    Modifier

  8. PlayStation 2 Slimline IR Sensor Replacement: étape 7, image 1 de 1

    • Gently lift and remove the IR Sensor from its designated slot.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Thomas Sullivan

Membre depuis le 10/23/13

3 927 Réputation

6 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 17

30 derniers jours : 95

Total : 6,824