Introduction
This guide will walk you through step-by-step on how to properly remove and install the motherboard in the PlayStation 2 Slimline.
Ce dont vous avez besoin
-
Étape 1 Removing Playstation 2 Slimline SCPH-7500x Outer Shell
Attention : les étapes 1 à 7 sont issues d'un tutoriel marqué comme en cours.
-
Turn off the PlayStation 2 and carefully unplug it from the power source. Also, it is important to eject the CD from the console before flipping the it upside down.
-
-
Étape 8 IR Sensor
Attention : l'étape 8 est issue d'un tutoriel marqué comme en cours.
-
Locate the IR sensor on the motherboard. Then, use tweezers to gently detach the blue/white ribbon that attaches the IR sensor to the motherboard.
-
-
-
Identify the clock battery, then use tweezers to disconnect the connector from the motherboard.
-
-
-
-
Locate the fan component of the motherboard of the PS2.
-
With your fingers or tweezers, peel off the sticker that holds down the fan's wiring.
-
-
Étape 14 Optical Drive
Attention : les étapes 14 à 18 sont issues d'un tutoriel marqué comme en cours.
-
Locate the optical drive on the motherboard.
-
-
-
What you see in this picture is the electronic components found in the PS2. We are now going to remove the top metal casing found on top of the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
12 autres ont terminé cette réparation.