Réparez vos affaires Communauté Boutique

PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement

Introduction

Follow this guide to replace the optical drive of the PlayStation 2 Slimline.

Ce dont vous avez besoin

  1. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement, Lower Smart Plate: étape 1, image 1 de 1

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Traduire

  2. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 2, image 1 de 1

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Traduire

  3. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 3, image 1 de 1

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Traduire

  4. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 4, image 1 de 2 PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 4, image 2 de 2

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Traduire

  5. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 5, image 1 de 1

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Traduire

  6. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 6, image 1 de 2 PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 6, image 2 de 2

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Traduire

  8. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement, Fan: étape 7, image 1 de 1

    • Pull the ribbon cable straight out from the socket.

    • To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable. If you can, apply the force to the plastic reinforcement rather than the cable itself.

    Traduire

  9. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 8, image 1 de 1

    • Remove three Phillips #0 screws securing the fan.

    Traduire

    • Lift the fan straight up and out of the PS2.

    Traduire

  11. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement, Power Supply: étape 10, image 1 de 1

    • Remove the Phillips screw from the power supply.

    Traduire

  12. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 11, image 1 de 1

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    Traduire

    • Lift the power supply straight up and out of the PS2.

    Traduire

  14. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement, Optical Drive: étape 13, image 1 de 1

    • Pull the two ribbon cables straight out from their sockets.

    • To reinstall the cables, hold it near the end and push it straight into the connector, being careful not to kink the cable. If you can, apply the force to the plastic reinforcement rather than the cable itself.

    Traduire

  15. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 14, image 1 de 2 PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 14, image 2 de 2

    • Turn around the PS2 by 180 degrees.

    • Lift the optical drive up from its four mountings.

    • Remove the glued ribbon cable from the EMI shield using a spudger and some isopropyl alcohol.

    Traduire

  16. PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 15, image 1 de 2 PlayStation 2 Slimline SCPH-900xx Optical Drive Replacement: étape 15, image 2 de 2

    • Pull the ribbon cable straight out from the socket.

    • To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable. If you can, apply the force to the plastic reinforcement rather than the cable itself.

    Traduire

    • Finally remove the optical drive from the PS2.

    Traduire
Conclusion

To reassemble your device, follow the above steps in reverse order.

2 autres ont terminé cette réparation.

Merci à ces traducteurs :

de en

100%

MrJulian

MrJulian nous aide à réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Auteur

avec 1 autre contributeur

MrJulian

Membre depuis le 10/22/20

1 573 Réputation

7 tutoriels rédigés

Badges: 18

+ 15 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 27

30 derniers jours : 105

Total : 1,080