Réparez vos affaires Communauté Boutique

PlayStation 2 Slimline SCPH-900xx Power Supply Replacement

Introduction

Follow this guide to replace the power supply on your PlayStation 2 Slimline.

Ce dont vous avez besoin

  1. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Lower Smart Plate: étape 1, image 1 de 1

    • Turn off your PlayStation 2 and remove the disc and Memory Card.

    • Turn over the PlayStation 2 and put it on a soft surface (e.g. a towel).

    Traduire

  2. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 2, image 1 de 1

    • Locate the six covers.

    • Two are located underneath the feet.

    • One cover is located underneath the Void sticker.

    Traduire

  3. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 3, image 1 de 1

    • Remove the Void sticker with a Spudger and some cleaning alcohol

    • Removing the Void sticker will void the warranty of your device!

    • Some versions of that console maybe don’t have the sticker or it’s relocated.

    Traduire

  5. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 4, image 1 de 2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 4, image 2 de 2

    • Remove the covers by using either a Spudger, Opening Picks or your fingernail.

    Traduire

  6. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 5, image 1 de 1

    • Remove the six Phillips #1 screws with a screwdriver.

    • The screws on the right are a bit deeper inside the shell as like the rest but are the same size.

    Traduire

  7. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 6, image 1 de 2 PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 6, image 2 de 2

    • Separate the clips at the front and the overhanging side from their mounting using a Prying Tool.

    • Separate the two halves.

    Traduire

  8. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement, Power Supply: étape 7, image 1 de 1

    • Remove the Phillips screw from the power supply.

    Traduire

  9. PlayStation 2 Slimline SCPH-900xx Power Supply Replacement: étape 8, image 1 de 1

    • Remove the power supply connector from the motherboard.

    • To separate the connector from its socket, squeeze the tab against the connector, and pull the connector straight up from the socket.

    Traduire

    • Lift the power supply straight up and out of the PS2.

    Traduire
Conclusion

To reassemble your device, follow the above steps in reverse order.

3 autres ont terminé cette réparation.

Merci à ces traducteurs :

de en

100%

MrJulian

shingle

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Auteur

avec 1 autre contributeur

MrJulian

Membre depuis le 10/22/20

1 573 Réputation

7 tutoriels rédigés

Badges: 18

+ 15 badges supplémentaires

Un commentaire

I remember i was open the PS2 for cleaning but when i cleaning the power supply, my sister plugged it than I got an electric shock. 🤣🤣🤣

Memozit - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 21

30 derniers jours : 88

Total : 625