Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
-
Utilisez la pointe d'un spudger pour retirer la vis-mère en caoutchouc noir du côté de la PS3.
-
-
-
Enlevez les vis suivantes :
-
Six vis Phillips de 52 mm
-
Une vis Phillips 30 mm
-
-
-
-
Soulevez le couvercle supérieur par le bord arrière et faites-le pivoter vers l'avant de la PS3.
-
Enlevez le couvercle supérieur.
-
Un crochet en plastique se trouve dans un trou dans le coin supérieur arrière droit. Éloignez délicatement le crochet en plastique de l'arrière de la machine en poussant un peu avec une spatule, pour dégager la partie arrière droite du boîtier.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the two 9 mm Phillips screws securing the memory card reader to the chassis.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the memory card reader out of the PS3 enough to access its cable.
-
Flip up the retaining flap on the memory card reader ribbon cable socket.
-
Pull the ribbon cable out of its socket.
-
Remove the memory card reader from the PS3.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pull the DC-In cables toward the front of the PS3 to disconnect them from the power supply.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the AC-In cables slightly away from the rear cover for clearance to access the AC-In connector.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
While depressing its locking mechanism, pull the AC-In connector out of its socket on the power supply.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the five 9 mm Phillips screws securing the power supply to the chassis.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the power supply upward from its front edge to disconnect it from the posts attached to the logic board.
-
Remove the power supply.
-
Annulation : je n'ai pas terminé ce tutoriel.
47 autres ont terminé cette réparation.
6 commentaires
This is for the 60gb version. As there is no card reader in the 80gb i replaced the power supply in and some of the psu screws were in a slightly different place. But a very good guide.
I have a Ps3 that was bought in America. The power supply is different to ours here in South Africa (Cape Town). A friend who gave me the Ps3 also had an external power supply built so that it can be used here. It's been working for years but now I have that green light thingy going. I've removed the disc that was in it and thought it may have been inserted incorrectly. Now that I have seen your tutorial I will definitely check if it's the power supply or mother board. Thank you.
CAN I HAVE THE MANUAL MY RED LIGHT IS ON ALSO DIRECT ME TO A GOOD PLACE FOR REPAIRS IN ACCRA GHANA EMAIL honmante54@yahoo.com thank you
why do your consoles have this red light on why do something about it
I have a ps3 but it's the CECHL but it has no card