Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

PlayStation 3 - How to replace Laser Lens and Mechanism (Laser Deck).


More info about disassembling, you can find in

PlayStation 3 Slim Teardown

Vidéo d'introduction

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

  2. Remove Power Supply. Remove Power Supply. Remove Power Supply.
    • Remove Power Supply.

  3. Separate cables, unscrew the screw and remove the Blu Ray drive. Separate cables, unscrew the screw and remove the Blu Ray drive. Separate cables, unscrew the screw and remove the Blu Ray drive.
    • Separate cables, unscrew the screw and remove the Blu Ray drive.

  4. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  5. Disassemble the upper metal shield. Disassemble the upper metal shield. Disassemble the upper metal shield.
    • Disassemble the upper metal shield.

  6. Remove the two very small phillips screws in each lower corner referenced by the red circles. Remove the two very small phillips screws in each lower corner referenced by the red circles. Remove the two very small phillips screws in each lower corner referenced by the red circles.
    • Remove the two very small phillips screws in each lower corner referenced by the red circles.

  7. Be careful with flex cables. Be careful with flex cables. Be careful with flex cables.
    • Be careful with flex cables.

  8. Now you can remove the Laser Deck. Now you can remove the Laser Deck. Now you can remove the Laser Deck.
    • Now you can remove the Laser Deck.

  9. Transfer two flex cables and 2x rubbers. Transfer two flex cables and 2x rubbers. Transfer two flex cables and 2x rubbers.
    • Transfer two flex cables and 2x rubbers.

  10. You can test the console before full assembling. You can test the console before full assembling. You can test the console before full assembling.
    • You can test the console before full assembling.

Conclusion

To reassemble your device, follow these instructions in reverse order.

13 autre(s) ont terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

172 616 Réputation

307 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

294 membres

943 tutoriels rédigés

Do you know what the part number is for the deck? I don’t want to buy the wrong one. Thanks.

Edmond Charrette - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 5

7 derniers jours : 36

30 derniers jours : 162

Total : 18,519