Introduction

You can use this method if you can't eject the stuck disk by the eject button and the eject hole. The PS3 slim on this video is model CECH-300X.

Full video you can see here:

More info about disassembling, you can find in PlayStation 3 Slim Teardown

Vidéo d'introduction

  1. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case. Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.
    • Disconnect all cables. You have 4x Torx T8 screws and 7x Phillips screws. Now you can remove outer case.

  2. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side. Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.
    • Unscrew the three screws. To remove Blu Ray unit shell you must open two plates that are on the left and right side.

  3. %Livraison gratuite pour toute commande supérieure à 100,00 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  4. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside. First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.
    • First remove the spindle disc magnet. Now use plastic tool and slowly extrude the disk from inside.

  5. In this case we have ... 4x disks. :) .
    • In this case we have ... 4x disks. :)

    • .

    • Did you do it successfully?

  6. Test the console before assembling. And don't forget to put the spindle disc magnet. Test the console before assembling. And don't forget to put the spindle disc magnet.
    • Test the console before assembling. And don't forget to put the spindle disc magnet.

Conclusion

To reassemble your device, follow these instructions in reverse order.

14 autre(s) ont terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

162 305 Réputation

304 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

280 membres

783 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 4

7 derniers jours : 29

30 derniers jours : 177

Total : 11,852