Réparez vos affaires Communauté Boutique

PlayStation 3 Slim AC Inlet Replacement

Introduction

Use this guide to replace the AC socket and its cables connected to the power supply.

Ce dont vous avez besoin

  1. PlayStation 3 Slim AC Inlet Replacement, Top Cover: étape 1, image 1 de 1

    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

    Traduire

  2. PlayStation 3 Slim AC Inlet Replacement: étape 2, image 1 de 2 PlayStation 3 Slim AC Inlet Replacement: étape 2, image 2 de 2

    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

    Traduire

  3. PlayStation 3 Slim AC Inlet Replacement: étape 3, image 1 de 1

    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

    Traduire

  4. PlayStation 3 Slim AC Inlet Replacement: étape 4, image 1 de 1

    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

    Traduire

  6. PlayStation 3 Slim AC Inlet Replacement: étape 5, image 1 de 2 PlayStation 3 Slim AC Inlet Replacement: étape 5, image 2 de 2

    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

    Traduire

  7. PlayStation 3 Slim AC Inlet Replacement, Power Supply: étape 6, image 1 de 2 PlayStation 3 Slim AC Inlet Replacement, Power Supply: étape 6, image 2 de 2

    • Squeeze the AC inlet connector's locking mechanism and pull straight up to disconnect it from the power supply.

    Traduire

  8. PlayStation 3 Slim AC Inlet Replacement: étape 7, image 1 de 1

    • Pull the DC-Out cables straight up to lift their connector up and out of its socket on the power supply.

    Traduire

  9. PlayStation 3 Slim AC Inlet Replacement: étape 8, image 1 de 1

    • Remove the two 7.6 mm Phillips screws securing the power supply to the lower case.

    Traduire

  10. PlayStation 3 Slim AC Inlet Replacement: étape 9, image 1 de 1

    • Lift the power supply upward from its left edge as viewed from the front of the PS3.

    Traduire

  11. PlayStation 3 Slim AC Inlet Replacement: étape 10, image 1 de 2 PlayStation 3 Slim AC Inlet Replacement: étape 10, image 2 de 2

    • Continue to lift the left edge of the power supply until it lifts off the two metal posts shown in the second picture.

    • Remove the power supply from the PS3, minding any cables that may get caught.

    Traduire

  12. PlayStation 3 Slim AC Inlet Replacement, AC Inlet: étape 11, image 1 de 2 PlayStation 3 Slim AC Inlet Replacement, AC Inlet: étape 11, image 2 de 2

    • Lift the AC inlet cables straight upward to remove the AC inlet from the lower case.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

25 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 5

7 derniers jours : 31

30 derniers jours : 104

Total : 25,145