Réparez vos affaires Communauté Boutique

PlayStation 3 Slim Top Cover Replacement

Introduction

Use this guide to remove the plastic top cover.

Ce dont vous avez besoin

  1. PlayStation 3 Slim Top Cover Replacement, Top Cover: étape 1, image 1 de 1

    • Turn the PS3 over and lay it on its backside.

    • Carefully peel the warranty sticker up off the lower case to reveal a hidden screw cover.

    • To avoid activating the VOID that may come up, heat the sticker carefully to remove and replace it cleanly.

    Traduire

  2. PlayStation 3 Slim Top Cover Replacement: étape 2, image 1 de 2 PlayStation 3 Slim Top Cover Replacement: étape 2, image 2 de 2

    • Use the flat end of a metal spudger to pry up the seven screw covers around the edge of the lower case.

    Traduire

  4. PlayStation 3 Slim Top Cover Replacement: étape 3, image 1 de 1

    • Remove the seven 37 mm Phillips screws securing the top cover to the lower case.

    Traduire

  5. PlayStation 3 Slim Top Cover Replacement: étape 4, image 1 de 1

    • Remove the four 13.3 mm T8 security Torx screws beneath the Blu-ray drive opening. (Some models may only have three screws)

    Traduire

  6. PlayStation 3 Slim Top Cover Replacement: étape 5, image 1 de 2 PlayStation 3 Slim Top Cover Replacement: étape 5, image 2 de 2

    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Lift the top cover off the PS3.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

92 autres ont terminé cette réparation.

2 commentaires

No good mine a Sony.

james register - Réponse

Thank you this helped me so much!!!!

Megan Davis - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 12

7 derniers jours : 79

30 derniers jours : 305

Total : 73,214