Aller au contenu principal

PlayStation 3 Top Cover Replacement

Ce dont vous avez besoin

  1. PlayStation 3 Top Cover Replacement, Smart Plate: étape 1, image 1 de 2 PlayStation 3 Top Cover Replacement, Smart Plate: étape 1, image 2 de 2
    • Use the tip of a spudger to remove the black rubber screw cover from the side of the PS3.

    • The screw cover may be underneath a warranty sticker. This sticker will change appearance, and show "VOID" after it has been removed.

  2. PlayStation 3 Top Cover Replacement: étape 2, image 1 de 1
    • Remove the single 8.5 mm T10 Security Torx screw from the smart plate.

  3. PlayStation 3 Top Cover Replacement: étape 3, image 1 de 3 PlayStation 3 Top Cover Replacement: étape 3, image 2 de 3 PlayStation 3 Top Cover Replacement: étape 3, image 3 de 3
    • Pull the smart plate toward the hard drive bay, then lift it off the body of the PS3.

  4. PlayStation 3 Top Cover Replacement: étape 4, image 1 de 1
    • Be sure to keep track of the small metal bracket loosely held in the top cover, if equipped.

  5. PlayStation 3 Top Cover Replacement, Top Cover: étape 5, image 1 de 1
    • Remove the following seven screws:

    • Six 52 mm Phillips screws

    • One 30 mm Phillips screw

  6. PlayStation 3 Top Cover Replacement: étape 6, image 1 de 1
    • Lift the top cover from its rear edge and rotate it toward the front of the PS3.

    • Remove the top cover.

    • There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit front the rear of the machine with a spudger to release the rear right of the casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

47 autres ont terminé cette réparation.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 80

30 derniers jours : 324

Total : 49,748