Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

PlayStation Controller Port Replacement

Introduction

This will guide you through the replacement of your controller port.

Ce dont vous avez besoin

  1. PlayStation Controller Port Replacement, Open the Console: étape 1, image 1 de 1

    • Before you begin, make sure the console is turned off and unplugged.

    • Turn the console upside down and remove the five 15.8 mm-long Phillips #1 screws.

    Traduire

  2. PlayStation Controller Port Replacement: étape 2, image 1 de 2 PlayStation Controller Port Replacement: étape 2, image 2 de 2

    • While holding the top and bottom halves of the console together, flip the console back over. Lift the top cover straight up to remove it.

    Traduire

  4. PlayStation Controller Port Replacement, Controller Port: étape 3, image 1 de 2 PlayStation Controller Port Replacement, Controller Port: étape 3, image 2 de 2

    • Remove the two screws securing the controller port to the case.

    Traduire

  5. PlayStation Controller Port Replacement: étape 4, image 1 de 1

    • Gently disconnect the ribbon cable from the logic board. This is done by pulling on the blue area of the cable near the connector.

    Traduire

  6. PlayStation Controller Port Replacement: étape 5, image 1 de 1

    • Remove and replace the controller port.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

11 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

JakeDeschamps

Membre depuis le 10/28/09

1 901 Réputation

7 tutoriels rédigés

Badges: 18

+ 15 badges supplémentaires

Équipe

Cal Poly, Team 5-2, Regan Fall 2009 Membre de l'équipe Cal Poly, Team 5-2, Regan Fall 2009

CPSU-REGAN-F09S5G2

5 membres

8 tutoriels rédigés

5 commentaires

I try replacing the controller and still wouldn't play memory cards.

redevil19 - Réponse

I changed the controller port but the psx still doesn't recognize any controller. Both controller port and ribbon cable work perfect in other console. I wonder which components on the mother board are related with the controller ports so I can check them with a tester.

Daniel Prieto - Réponse

I replaced the PS605 fuse and now the controllers work again! Thanks to this video https://www.youtube.com/watch?v=HdULot5F...

Daniel Prieto -

I'm having a weird issue, it will read in second do

Port but not the first. Changed controller port and still having the same issue

michael wise - Réponse

The problem on mine is where I can’t use memory card slot 1 but Slot 2 works and is what I use but I would like to used slot 1 and have more than just a single memory card for playing games on it.

Travirus - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 35

30 derniers jours : 153

Total : 26,371