Réparez vos affaires Communauté Boutique

PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement

Tutoriel Archivé
Ce tutoriel est conservé uniquement à des fins de suivis historiques. Utilisez la version actuelle du tutoriel pour effectuer votre réparation.

Introduction

This will repair your SCPH-5501 without buying a new KSM-440-ADM laser off of ebay.

Ce dont vous avez besoin

  1. PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement, Laser from a SCPH-7501: étape 1, image 1 de 3 PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement, Laser from a SCPH-7501: étape 1, image 2 de 3 PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement, Laser from a SCPH-7501: étape 1, image 3 de 3

    • Remove the parallel port cover on the back of the PlayStation.

    • Flip over the PlayStation and remove the six screws from the bottom.

    • Turn the PlayStation upright. Remove the cover by lifting it up.

    Modifier

  2. PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 2, image 1 de 3 PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 2, image 2 de 3 PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 2, image 3 de 3

    • Carefully disconnect the gold-colored ribbon cable from it's connector. To avoid damaging the cable, pull it by the white, reinforced tab.

    Modifier

  4. PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 3, image 1 de 3 PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 3, image 2 de 3 PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 3, image 3 de 3

    • Disconnect the second cable by pulling up on the plastic connector at the end.

    • Remove the 2 screws and take the black bottom piece of the old Optical drive.

    • Take the new Optical drive from either a SCPH-7501 or an SCPH-9001.

    • Gently pull on the orange ribbon, but not too much or you could rip it.

    Modifier

  5. PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 4, image 1 de 1

    • Take the bottom piece you took out and place it on the new Optical drive and screw it on the new drive.

    Modifier

  6. PlayStation Laser from a SCPH-7501 or SCPH-9001 Replacement: étape 5, image 1 de 1

    • Here is what your work should look like.

    • Put it back together, plug it in, turn it on and test it to see if it works.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Unchi

Membre depuis le 10/27/13

367 Réputation

2 tutoriels rédigés

Badges: 4

+ 1 badge de plus

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,620