Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

PlayStation Logic Board Replacement

Ce dont vous avez besoin

  1. PlayStation Logic Board Replacement, Open the Console: étape 1, image 1 de 1
    • Before you begin, make sure the console is turned off and unplugged.

    • Turn the console upside down and remove the five 15.8 mm-long Phillips #1 screws.

  2. PlayStation Logic Board Replacement: étape 2, image 1 de 2 PlayStation Logic Board Replacement: étape 2, image 2 de 2
    • While holding the top and bottom halves of the console together, flip the console back over. Lift the top cover straight up to remove it.

  3. PlayStation Logic Board Replacement, Remove the Optical Drive: étape 3, image 1 de 2 PlayStation Logic Board Replacement, Remove the Optical Drive: étape 3, image 2 de 2
    • Pull the optical drive power cable straight up and out of its socket on the motherboard to disconnect it.

  4. PlayStation Logic Board Replacement: étape 4, image 1 de 3 PlayStation Logic Board Replacement: étape 4, image 2 de 3 PlayStation Logic Board Replacement: étape 4, image 3 de 3
    • Use the flat end of a spudger to lift up and unlock one side of the data cable's connector on the motherboard. Repeat this step on the other side of the connector.

    • You'll hear a faint click noise when unlocking the connector. Make sure not to apply too much pressure when lifting up on the connector with the spudger, or else damage may result.

    • Gently pull the optical drive data cable straight up and out of its socket on the motherboard to disconnect it.

  5. PlayStation Logic Board Replacement: étape 5, image 1 de 2 PlayStation Logic Board Replacement: étape 5, image 2 de 2
    • Lift the optical drive straight up to remove it.

  6. PlayStation Logic Board Replacement, Logic Board: étape 6, image 1 de 1
    • Remove the four screws from the logic board's metal cover.

  7. PlayStation Logic Board Replacement: étape 7, image 1 de 1
    • Detach power supply connector from logic board by pulling on the plastic tab.

  8. PlayStation Logic Board Replacement: étape 8, image 1 de 1
    • Detach white ribbon cable from logic board by gently lifting on it.

  9. PlayStation Logic Board Replacement: étape 9, image 1 de 1
    • With one hand, hold the main board’s protective metal cover. With your other hand, wedge the spudger in between the right side of the protective cover and the thin metal clamps that surround it.

    • With the spudger in place, gently lift the upper portion of the metal cover. The cover should detach from the right side.

  10. PlayStation Logic Board Replacement: étape 10, image 1 de 1
    • Using the same process from the previous step, wedge the spudger between the clamps and metal cover on the bottom side (as shown in the picture).

    • With your other hand, pull up on the top right corner of the metal cover to lift it off.

  11. PlayStation Logic Board Replacement: étape 11, image 1 de 1
    • Remove the last four screws from the logic board.

  12. PlayStation Logic Board Replacement: étape 12, image 1 de 1
    • Lift the logic board out of the PlayStation and replace with a new logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

27 autres ont terminé cette réparation.

JakeDeschamps

Membre depuis le 10/28/09

1 901 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 5-2, Regan Fall 2009 Membre de l'équipe Cal Poly, Team 5-2, Regan Fall 2009

CPSU-REGAN-F09S5G2

5 membres

8 tutoriels rédigés

2 commentaires

Hi there.

Here i can buy that copper tape from the right of the metal shield ?

Thkx in adv

Haitham - Réponse

Excelente guía, esto ayuda a muchos para aprender a reparar y no hacer gastos innecesarios.

aldrin peñate - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 7

7 derniers jours : 69

30 derniers jours : 198

Total : 25,951