Réparez vos affaires Communauté Boutique

PlayStation Move Case Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

This is a prerequisite guide that will show you how to disassemble the PlayStation Move controller.

Ce dont vous avez besoin

  1. PlayStation Move Case Replacement, Case: étape 1, image 1 de 2 PlayStation Move Case Replacement, Case: étape 1, image 2 de 2

    • Turn the controller over and unscrew the four 10mm screws with a PH #00 screwdriver.

    Traduire

  2. PlayStation Move Case Replacement: étape 2, image 1 de 3 PlayStation Move Case Replacement: étape 2, image 2 de 3 PlayStation Move Case Replacement: étape 2, image 3 de 3

    • Pinch the sides of the back panel to remove it and set it aside.

    Traduire

  3. PlayStation Move Case Replacement: étape 3, image 1 de 2 PlayStation Move Case Replacement: étape 3, image 2 de 2

    • Hold the base of the controller with one hand and with the other carefully pull up on the white spherical piece to remove it.

    Traduire

  4. PlayStation Move Case Replacement: étape 4, image 1 de 2 PlayStation Move Case Replacement: étape 4, image 2 de 2

    • Push the Lithium Ion battery from its slot to remove it.

    • Be mindful not to damage the wires or wired components, as the battery will still be attached via its connector.

    Traduire

  6. PlayStation Move Case Replacement: étape 5, image 1 de 1

    • Unscrew the 9mm screw in the battery slot with a PH #00 screwdriver.

    Traduire

  7. PlayStation Move Case Replacement: étape 6, image 1 de 2 PlayStation Move Case Replacement: étape 6, image 2 de 2

    • Using a plastic opening tool, carefully pry the rumble motor free.

    Traduire

  8. PlayStation Move Case Replacement: étape 7, image 1 de 1

    • Unscrew the 9mm screw behind the rumble motor slot with a PH #00 screwdriver.

    Traduire

  9. PlayStation Move Case Replacement: étape 8, image 1 de 3 PlayStation Move Case Replacement: étape 8, image 2 de 3 PlayStation Move Case Replacement: étape 8, image 3 de 3

    • Carefully pinch the plastic sides of the battery slot and lift it (along with the circuit board) from the plastic shell of the move controller.

    Traduire

  10. PlayStation Move Case Replacement: étape 9, image 1 de 2 PlayStation Move Case Replacement: étape 9, image 2 de 2

    • Using your fingers, carefully pry the square green piece beneath the battery slot free.

    • It is attached via white ribbons which need to be kept intact.

    Traduire

  11. PlayStation Move Case Replacement: étape 10, image 1 de 3 PlayStation Move Case Replacement: étape 10, image 2 de 3 PlayStation Move Case Replacement: étape 10, image 3 de 3

    • Follow the white ribbon attached to the part you just removed to a smaller, more rectangular piece.

    • Lift the rectangular piece from its slot to free it.

    Traduire

  12. PlayStation Move Case Replacement: étape 11, image 1 de 3 PlayStation Move Case Replacement: étape 11, image 2 de 3 PlayStation Move Case Replacement: étape 11, image 3 de 3

    • Carefully lift the entire circuit board from the black plastic encasing it.

    • Take extra care not to damage any of the wired components.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Sarah Shand

Membre depuis le 02/20/17

1 885 Réputation

7 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team S3-G1, Sullivan Spring 2017 Membre de l'équipe USF Tampa, Team S3-G1, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G1

3 membres

13 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 80