Réparez vos affaires Communauté Boutique

PlayStation TV Thermal Pad Replacement

Introduction

However, the Sony engineers also included a thermal pad to aide heat transfer in their design. These thermal pads can be worn out with excessive use, or severe overheating events. After this, it is best to replace the pads to keep the device performing optimally.

Ce dont vous avez besoin

  1. PlayStation TV Thermal Pad Replacement, Motherboard: étape 1, image 1 de 2 PlayStation TV Thermal Pad Replacement, Motherboard: étape 1, image 2 de 2

    • Use the plastic spudger to pry up the bottom piece of the case to release the clips.

    Modifier

  2. PlayStation TV Thermal Pad Replacement: étape 2, image 1 de 2 PlayStation TV Thermal Pad Replacement: étape 2, image 2 de 2

    • Remove the four 6 mm Phillips screws.

    • Remove the two Phillips #0 screws.

    Modifier

  3. PlayStation TV Thermal Pad Replacement: étape 3, image 1 de 2 PlayStation TV Thermal Pad Replacement: étape 3, image 2 de 2

    • Remove the heat shield using the plastic opening tool.

    • Slide the tool around the edges until the shield is free.

    Modifier

  5. PlayStation TV Thermal Pad Replacement: étape 4, image 1 de 2 PlayStation TV Thermal Pad Replacement: étape 4, image 2 de 2

    • Remove the last 6mm Phillips #0 screw from the motherboard.

    Modifier

  6. PlayStation TV Thermal Pad Replacement: étape 5, image 1 de 2 PlayStation TV Thermal Pad Replacement: étape 5, image 2 de 2

    • Use a plastic opening tool to pry up gently on the motherboard, and remove it.

    Modifier

  7. PlayStation TV Thermal Pad Replacement, Thermal Pad: étape 6, image 1 de 2 PlayStation TV Thermal Pad Replacement, Thermal Pad: étape 6, image 2 de 2

    • Remove the old thermal pad with an ESD safe tool, like a Jimmy.

    Modifier

  8. PlayStation TV Thermal Pad Replacement: étape 7, image 1 de 2 PlayStation TV Thermal Pad Replacement: étape 7, image 2 de 2

    • Wipe down the area where the old thermal pads were located with rubbing alcohol.

    • It is important that the area be as clean as possible.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

Theodore Hesse

Membre depuis le 01/22/16

145 Réputation

1 tutoriel rédigé

Badges: 5

+ 2 badges supplémentaires

Équipe

IUPUI, Team 3-1, Baechle Spring 2016 Membre de l'équipe IUPUI, Team 3-1, Baechle Spring 2016

IUPUI-BAECHLE-S16S3G1

4 membres

4 tutoriels rédigés

2 commentaires

Photos for steps 6 through 9 will be posted soon!

Luk Davis - Réponse

Do you replace the thermal pad? Your directions do not state where to do this, and if so what part and size do you recommend?

Daimonion - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 25

Total : 1,750