Réparez vos affaires Communauté Boutique

PlayStation VR Processor Unit Cooling Fan Replacement

Introduction

A damaged or broken cooling fan can make your system overheat so it is important to replace it if that happens in order to prevent any further damage to the system.

Ce dont vous avez besoin

  1. PlayStation VR Processor Unit Cooling Fan Replacement, Processor Unit Cooling Fan: étape 1, image 1 de 3 PlayStation VR Processor Unit Cooling Fan Replacement, Processor Unit Cooling Fan: étape 1, image 2 de 3 PlayStation VR Processor Unit Cooling Fan Replacement, Processor Unit Cooling Fan: étape 1, image 3 de 3

    • On one side of the console (the side adjacent to the fan vent), there will be two 6 mm screws. Unscrew them with a PH #000 screwdriver.

    Modifier

  2. PlayStation VR Processor Unit Cooling Fan Replacement: étape 2, image 1 de 3 PlayStation VR Processor Unit Cooling Fan Replacement: étape 2, image 2 de 3 PlayStation VR Processor Unit Cooling Fan Replacement: étape 2, image 3 de 3

    • Press and slide the side panel (it will have the two ports) back to reveal an additional 6 mm screw.

    • Unscrew the 6mm screw with a PH #000 screwdriver.

    Modifier

  3. PlayStation VR Processor Unit Cooling Fan Replacement: étape 3, image 1 de 2 PlayStation VR Processor Unit Cooling Fan Replacement: étape 3, image 2 de 2

    • Slide the panel back into place.

    Modifier

  5. PlayStation VR Processor Unit Cooling Fan Replacement: étape 4, image 1 de 3 PlayStation VR Processor Unit Cooling Fan Replacement: étape 4, image 2 de 3 PlayStation VR Processor Unit Cooling Fan Replacement: étape 4, image 3 de 3

    • Using a plastic opening tool, carefully pry the panel from the main console to reveal the HDMI ports.

    • You will probably need to lift it on both sides in order for the panel to come loose.

    Modifier

  6. PlayStation VR Processor Unit Cooling Fan Replacement: étape 5, image 1 de 1

    • Turn the console over.

    • Unscrew the two 9 mm screws with a PH #000 screwdriver.

    Modifier

  7. PlayStation VR Processor Unit Cooling Fan Replacement: étape 6, image 1 de 2 PlayStation VR Processor Unit Cooling Fan Replacement: étape 6, image 2 de 2

    • With the plastic opening tool, carefully pry the console shell panel free and lift it away.

    Modifier

  8. PlayStation VR Processor Unit Cooling Fan Replacement: étape 7, image 1 de 2 PlayStation VR Processor Unit Cooling Fan Replacement: étape 7, image 2 de 2

    • Using tweezers, carefully pull the multi colored bundled cable from its port connecting the fan to the console.

    • Carefully lift the fan and its wiring from the device.

    • Be mindful of damaging the wires.

    • Take care to keep your fingers away from the fan blades.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Sarah Shand

Membre depuis le 02/20/17

1 885 Réputation

7 tutoriels rédigés

Badges: 12

+ 9 badges supplémentaires

Équipe

USF Tampa, Team S3-G1, Sullivan Spring 2017 Membre de l'équipe USF Tampa, Team S3-G1, Sullivan Spring 2017

USFT-SULLIVAN-S17S3G1

3 membres

13 tutoriels rédigés

4 commentaires

Where do I get a replacement fan tho?

Ponos King - Réponse

I think is a 3x3 cm fan, alliexpres has some, but what voltage?

crus - Réponse

5V is what i have read

Ethan Amos -

Reference for fan when I have replaced mine : DELTA ELECTRONICS MODEL : ASB0305MA-01 DC 5V 0.19A

herossuperman - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 12

30 derniers jours : 53

Total : 8,726