Aller au contenu principal

PlayStation Vita 3G Antenna Cable Replacement

Ce dont vous avez besoin

  1. PlayStation Vita 3G Antenna Cable Replacement, Case Separation: étape 1, image 1 de 2 PlayStation Vita 3G Antenna Cable Replacement, Case Separation: étape 1, image 2 de 2
    • Power off and remove the memory card.

    • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

  2. PlayStation Vita 3G Antenna Cable Replacement: étape 2, image 1 de 3 PlayStation Vita 3G Antenna Cable Replacement: étape 2, image 2 de 3 PlayStation Vita 3G Antenna Cable Replacement: étape 2, image 3 de 3
    • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

    • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

  3. PlayStation Vita 3G Antenna Cable Replacement: étape 3, image 1 de 2 PlayStation Vita 3G Antenna Cable Replacement: étape 3, image 2 de 2
    • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

  4. PlayStation Vita 3G Antenna Cable Replacement: étape 4, image 1 de 3 PlayStation Vita 3G Antenna Cable Replacement: étape 4, image 2 de 3 PlayStation Vita 3G Antenna Cable Replacement: étape 4, image 3 de 3
    • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

    • Continue working your way around the device gently prying it open.

    • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

  5. PlayStation Vita 3G Antenna Cable Replacement: étape 5, image 1 de 2 PlayStation Vita 3G Antenna Cable Replacement: étape 5, image 2 de 2
    • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

    One of the shoulder buttons fell out when I was doing this step, along with the piece holding it in place. They go back in just fine when reassembling but make sure that they are oriented properly, of course.

    klung - Réponse

  6. PlayStation Vita 3G Antenna Cable Replacement: étape 6, image 1 de 1
    • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

  7. PlayStation Vita 3G Antenna Cable Replacement: étape 7, image 1 de 1
    • Free the battery cable by gently prying up on the connection with a spudger.

    Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

    Jimbo Jones - Réponse

    This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

    ylimakiminna - Réponse

    Yea I messed up there too. Is there a way to fix it?

    Alethia Henry - Réponse

    This component was far more stubborn than the screen connector when it came to removal. I opted for a smaller tool than the spudger (small flat-head) and managed to disconnect it after determining the best bit size for the job. Screwdriver is metal, obviously, so being gentle helps to avoid damaging anything.

    klung - Réponse

    broke the white part

    Benaya Miller - Réponse

  8. PlayStation Vita 3G Antenna Cable Replacement: étape 8, image 1 de 1
    • Separate the front and rear cases.

  9. PlayStation Vita 3G Antenna Cable Replacement, 3G Antenna Cable: étape 9, image 1 de 1
    • Using the pointy end of a spudger, gently pry the 3G antenna cable off of the wireless card.

  10. PlayStation Vita 3G Antenna Cable Replacement: étape 10, image 1 de 1
    • Using the pointy end of a spudger, gently pry the 3G antenna cable off the right button board.

    • Deroute the 3G antenna cable out of the casing and remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Brittany McCrigler

Membre depuis le 03/05/12

88 898 Réputation

131 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

16 560 tutoriels rédigés

Un commentaire

I need mine fixed because it has came out but it isn’t a wire it is like a orange thin thing and it won’t clip back in

Jacob Gaming videos 123 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 7

30 derniers jours : 47

Total : 7,693