Introduction

This guide takes you through installing a camera on the PlayStation Vita.

Power off and remove the memory card.
  • Power off and remove the memory card.

  • Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.

Ajouter un commentaire

Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.
  • Using your fingernail or a spudger, pry open the accessory port cover on the top of the device.

  • Using a Phillips #00 screwdriver, remove the two 5.4mm screws hidden beneath the accessory port cover.

Ajouter un commentaire

  • Remove the two 5.4mm Phillips #00 screws on the bottom of the device near the charging port.

Ajouter un commentaire

  • Beginning at the sides of the device, use a plastic opening tool to separate the front and rear cases.

  • Continue working your way around the device gently prying it open.

  • There are still wires holding the front and rear cases together. You may damage the connections if you yank the cases completely apart.

Ajouter un commentaire

  • Gently separate the two cases, minding the battery and the touch screen controller connectors holding the two cases together.

Ajouter un commentaire

  • Using a spudger, free the touch screen controller flex cable by gently prying up the connection.

Ajouter un commentaire

  • Free the battery cable by gently prying up on the connection with a spudger.

Any idea what type of pcb header is on the board for the battery? I have a motherboard with a broken header but I cant source a replacement

Jimbo Jones - Réponse

This is where I screwed up so I recommend extra caution for other newbies. Only the black part is supposed to come off. Don't be an idiot like me and pry off too much...

ylimakiminna - Réponse

Yea I messed up there too. Is there a way to fix it?

Alethia Henry - Réponse

  • Separate the front and rear cases.

Ajouter un commentaire

  • Release the camera flex cable socket by prying up on the tab with a spudger. Leave the socket open.

Ajouter un commentaire

  • Using a spudger, gently pry up the camera.

  • Work your way under the camera and along the camera flex cable, using the pointy tip of the spudger to peel away the adhesive, freeing the camera.

  • Carefully lift and remove the camera.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Brittany McCrigler

Membre depuis le 05/03/2012

79 483 Réputation

133 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

112 membres

6 717 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 9

30 derniers jours : 53

Total : 4,752