Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide takes you through the process of installing the GPS antenna cable. This is the middle antenna cable on the wireless card.
Ce dont vous avez besoin
-
-
Using a Phillips #00 screwdriver, remove the four 6.4mm screws on the back casing.
-
-
-
-
Using the pointy end of the spudger, gently pry the GPS antenna cable off the wireless card.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.