Introduction

You will be using a metal spudger for this guide to remove the back cover. This is a prerequisite step for all further guides and will be important for all replacement steps. It is advised to be cautious when using the tools to avoid further damage to the equipment.

Pièces

Aucune pièce nécessaire.

  1. Use spudger to remove small panels to the immediate left and right of the camera. Use spudger to remove small panels to the immediate left and right of the camera.
    • Use spudger to remove small panels to the immediate left and right of the camera.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Use spudger to begin lifting back cover. Then, create leverage and gently remove entire cover.
    • Use spudger to begin lifting back cover.

    • Then, create leverage and gently remove entire cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Logan David Wagner

Membre depuis le 06/11/2018

85 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S1-G4, Hovde Fall 2018 Membre de l'équipe IUPUI, Team S1-G4, Hovde Fall 2018

IUPUI-HOVDE-F18S1G4

3 membres

3 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 32