Introduction

This is a short guide for replacing a pokewalker battery

Locate the Screw on the Back of the Pokewalker.
  • Locate the Screw on the Back of the Pokewalker.

Ajouter un commentaire

Remove the Screw with a Phillips #0 Screwdriver
  • Remove the Screw with a Phillips #0 Screwdriver

  • The screw is attached to the rear case with washers. don't worry about losing it.

Ajouter un commentaire

Remove the Rear Cover from the Device
  • Remove the Rear Cover from the Device

Ajouter un commentaire

Use the flat end of a Spudger to Remove the Battery
  • Use the flat end of a Spudger to Remove the Battery

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Winni Stuart

Membre depuis le 13/04/2014

327 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 16

30 derniers jours : 80

Total : 2,039