Réparez vos affaires Communauté Boutique

Pokewalker Button Replacement

Introduction

How to Replace a Cracked or Broken Button on a Pokewalker

Ce dont vous avez besoin

  1. Pokewalker Button Replacement, Battery: étape 1, image 1 de 1

    • Locate the Screw on the Back of the Pokewalker.

    Modifier

  2. Pokewalker Button Replacement: étape 2, image 1 de 1

    • Remove the Screw with a Phillips #0 Screwdriver

    • The screw is attached to the rear case with washers. don't worry about losing it.

    Modifier

  3. Pokewalker Button Replacement: étape 3, image 1 de 1

    • Remove the Rear Cover from the Device

    Modifier

  4. Pokewalker Button Replacement: étape 4, image 1 de 1

    • Use the flat end of a Spudger to Remove the Battery

    Modifier

    • Locate the 4 Screws Around the Device

    Modifier

    • Remove all 4 screws with a Y0 Triwing Screwdriver

    Modifier

    • Separate the 2 halves of the Device

    • Do not Separate Completely as the Display is Still Connected by a Ribbon Cable

    Modifier

  9. Outil utilisé dans cette étape :
    Tweezers
    $4.99
    J'achète

    • Use a Spudger to Flip the Latch holding the ribbon cable in place and use Tweezers to Pull it out

    • Do not use Excessive force when reinserting the cable, because ribbon cables are fragile

    Modifier

    • Remove the Rubber-button thingy from the upper case

    • I have no idea what that thing is, edit this guide if you do.

    Modifier

    • Remove the 3 Plastic Buttons from the Case

    • It helps that the buttons only go in one way, makes it easier to reassemble

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Winni Stuart

Membre depuis le 04/13/14

417 Réputation

2 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 10

Total : 556