In this guide, the wrist band of the Polar V800 is removed for a clear view of the back panel. If you find it helpful, you may want to remove the wrist strap. Please reference the Watch Band Replacement guide for removal instructions if you wish to do so.
  • In this guide, the wrist band of the Polar V800 is removed for a clear view of the back panel. If you find it helpful, you may want to remove the wrist strap. Please reference the Watch Band Replacement guide for removal instructions if you wish to do so.

  • Ensure your Polar V800 sports watch is powered off before continuing.

  • Remove the eight, 7.4 millimeter-long screws on the back of the watch with a T5 head-type, torque screwdriver.

Ajouter un commentaire

Gently separate the watch housing from the back panel.
  • Gently separate the watch housing from the back panel.

  • The watch should come apart easily after removing the screws. If you experience difficulties separating the housing and and back cover, use a spudger to gently pry apart the back panel and the button and screen protector housing.

Ajouter un commentaire

  • The waterproofing seal is the red, elastic band that surrounds the display of the watch.

  • Remove the waterproofing seal.

  • During reassembly, align the red seal in the groove surrounding the glass screen on the main watch housing to ensure a watertight seal.

Ajouter un commentaire

  • Though not necessary, following the Polar V800 Display Replacement first may make the motherboard easier to remove.

  • Remove the nine, 4.0 millimeter-long screws with a T5 head-type torque screwdriver.

Ajouter un commentaire

  • Once all of the screws have been removed, lift the motherboard to expose the battery beneath motherboard.

  • A red wire and a black wire should run between the motherboard and the battery.

Ajouter un commentaire

  • The battery is glued down to the back of the watch. It may take some force to detach the battery at the glue joint.

  • Use a spudger to pry the battery from the back of the watch.

    • If your battery is swollen, be very careful in removing the battery. If the packaging is ruptured, the battery will be unsafe to handle with bare hands. The contents of the battery are hazardous.

Ajouter un commentaire

  • Gently pull the wires from their solder joints to disconnect them from the body of the watch.

  • To reconnect the wires to their solder joints, they must be soldered on. See the guide linked above for more guidance.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jarod Lyles

Membre depuis le 18/04/2018

602 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S17-G6, Livingston Spring 2018 Membre de l'équipe Cal Poly, Team S17-G6, Livingston Spring 2018

CPSU-LIVINGSTON-S18S17G6

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 13

30 derniers jours : 43

Total : 157