Réparez vos affaires Communauté Boutique

Polaroid Cube Lens Replacement

Introduction

This guide provides a great explanation about how to replace the lens of the Polaroid cube.

Due to the thickness and width of the screws, make sure to carefully remove them using a screwdriver and a magnet pad.

Ce dont vous avez besoin

  1. Polaroid Cube Lens Replacement, Battery: étape 1, image 1 de 1

    • Remove the SD card cover by twisting it using a Plastic Opening Tool

    Modifier

  2. Polaroid Cube Lens Replacement: étape 2, image 1 de 1

    • Use the Plastic Opening tool to pry off and remove the front cover.

    Modifier

  3. Polaroid Cube Lens Replacement: étape 3, image 1 de 1

    • Using a J00 head screwdriver, remove the four 3.27mm screws from the front of the camera near the lens.

    Modifier

  4. Polaroid Cube Lens Replacement: étape 4, image 1 de 2 Polaroid Cube Lens Replacement: étape 4, image 2 de 2

    • Use the Plastic Opening Tool to pry open the shell of the camera.

    • There are four latches, one at each corner, that you will need to detach.

    Modifier

  5. Polaroid Cube Lens Replacement: étape 5, image 1 de 1

    • Remove shell from top and bottom of camera.

    Modifier

  7. Polaroid Cube Lens Replacement: étape 6, image 1 de 1

    • Remove the rubber seal wrapped around the camera.

    Modifier

  8. Polaroid Cube Lens Replacement: étape 7, image 1 de 2 Polaroid Cube Lens Replacement: étape 7, image 2 de 2

    • Remove the tape wrapped around the battery.

    Modifier

  9. Polaroid Cube Lens Replacement: étape 8, image 1 de 3 Polaroid Cube Lens Replacement: étape 8, image 2 de 3 Polaroid Cube Lens Replacement: étape 8, image 3 de 3

    • Using a J00 head screwdriver, unscrew the four 3.46mm screws from the top and bottom circuit board.

    Modifier

  10. Polaroid Cube Lens Replacement: étape 9, image 1 de 2 Polaroid Cube Lens Replacement: étape 9, image 2 de 2

    • Use the plastic opening tool to remove the circuit board that the battery is connected to.

    Modifier

  11. Polaroid Cube Lens Replacement: étape 10, image 1 de 1

    • Gently remove the battery pin connector from the circuit board.

    Modifier

  12. Polaroid Cube Lens Replacement, Lens: étape 11, image 1 de 2 Polaroid Cube Lens Replacement, Lens: étape 11, image 2 de 2

    • Use a J00 screwdriver to unscrew the two circled 3.5mm Phillips-head screws from the circuit board.

    Modifier

  13. Polaroid Cube Lens Replacement: étape 12, image 1 de 2 Polaroid Cube Lens Replacement: étape 12, image 2 de 2

    • Use a J00 head screwdriver to unscrew the two 3.5mm screws from the circuit board.

    Modifier

  14. Polaroid Cube Lens Replacement: étape 13, image 1 de 1

    • Remove the lens from the unscrewed circuit board and replace the broken lens.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Grant Baldwin

Membre depuis le 09/29/16

685 Réputation

2 tutoriels rédigés

Badges: 15

+ 12 badges supplémentaires

Équipe

IUPUI, Team 3-2, Harley Fall 2016 Membre de l'équipe IUPUI, Team 3-2, Harley Fall 2016

IUPUI-HARLEY-F16S3G2

4 membres

3 tutoriels rédigés

2 commentaires

Where can I find a replacement lens for the cube+? I broke the bubble part of the lens

Ben McAlister - Réponse

Maybe is posable replace wider view angle lens ? original looks like fpv camera lens foxeer or runcam micro. Possibly Caddx micro cam lens

starsas777 - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 6

30 derniers jours : 9

Total : 2,280