Réparez vos affaires Communauté Boutique

Polaroid Cube Video Quality Switch Replacement

Introduction

This guide will walk you through the video quality switch on your Polaroid Cube. Make sure the device is completely powered off before disassembly, and that you have all of the required tools.

Ce dont vous avez besoin

  1. Polaroid Cube Video Quality Switch Replacement, Battery: étape 1, image 1 de 1

    • Remove the SD card cover by twisting it using a Plastic Opening Tool

    Modifier

  2. Polaroid Cube Video Quality Switch Replacement: étape 2, image 1 de 1

    • Use the Plastic Opening tool to pry off and remove the front cover.

    Modifier

  3. Polaroid Cube Video Quality Switch Replacement: étape 3, image 1 de 1

    • Using a J00 head screwdriver, remove the four 3.27mm screws from the front of the camera near the lens.

    Modifier

  4. Polaroid Cube Video Quality Switch Replacement: étape 4, image 1 de 2 Polaroid Cube Video Quality Switch Replacement: étape 4, image 2 de 2

    • Use the Plastic Opening Tool to pry open the shell of the camera.

    • There are four latches, one at each corner, that you will need to detach.

    Modifier

  5. Polaroid Cube Video Quality Switch Replacement: étape 5, image 1 de 1

    • Remove shell from top and bottom of camera.

    Modifier

  7. Polaroid Cube Video Quality Switch Replacement: étape 6, image 1 de 1

    • Remove the rubber seal wrapped around the camera.

    Modifier

  8. Polaroid Cube Video Quality Switch Replacement: étape 7, image 1 de 2 Polaroid Cube Video Quality Switch Replacement: étape 7, image 2 de 2

    • Remove the tape wrapped around the battery.

    Modifier

  9. Polaroid Cube Video Quality Switch Replacement: étape 8, image 1 de 3 Polaroid Cube Video Quality Switch Replacement: étape 8, image 2 de 3 Polaroid Cube Video Quality Switch Replacement: étape 8, image 3 de 3

    • Using a J00 head screwdriver, unscrew the four 3.46mm screws from the top and bottom circuit board.

    Modifier

  10. Polaroid Cube Video Quality Switch Replacement: étape 9, image 1 de 2 Polaroid Cube Video Quality Switch Replacement: étape 9, image 2 de 2

    • Use the plastic opening tool to remove the circuit board that the battery is connected to.

    Modifier

  11. Polaroid Cube Video Quality Switch Replacement: étape 10, image 1 de 1

    • Gently remove the battery pin connector from the circuit board.

    Modifier

  12. Polaroid Cube Video Quality Switch Replacement, Video Quality Switch: étape 11, image 1 de 2 Polaroid Cube Video Quality Switch Replacement, Video Quality Switch: étape 11, image 2 de 2

    • Using a J00 head screwdriver, unscrew the 3.46mm screw that connects the top circuit board to the video quality switch board.

    Modifier

  13. Polaroid Cube Video Quality Switch Replacement: étape 12, image 1 de 1

    • Remove the circuit board.

    Modifier

  14. Polaroid Cube Video Quality Switch Replacement: étape 13, image 1 de 2 Polaroid Cube Video Quality Switch Replacement: étape 13, image 2 de 2

    • Using a J00 head screwdriver, unscrew the two 3.46mm screws connecting the video quality switch to the case.

    • Remove and replace the broken video quality switch.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 3 autres contributeurs

Grant Baldwin

Membre depuis le 09/29/16

685 Réputation

2 tutoriels rédigés

Badges: 15

+ 12 badges supplémentaires

Équipe

IUPUI, Team 3-2, Harley Fall 2016 Membre de l'équipe IUPUI, Team 3-2, Harley Fall 2016

IUPUI-HARLEY-F16S3G2

4 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 14

Total : 871