Introduction
If you need to replace the film door latch, use this guide to access the inside of the camera. You may need to replace the latch if your camera will not close.
Ce dont vous avez besoin
-
-
Unscrew the four 5mm screws on the base of the camera using a Phillips #0 screwdriver.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.
2 commentaires
This doesn’t actually say anything about replacing the latch…
But where do you buy a replacement latch?