Introduction

The shutter switch is the button which is to be pressed when the user wants to capture an image. If for some reason this switch needs to be replaced, this guide will be showing how to remove the shutter switch.

Pièces

Aucune pièce nécessaire.

Begin by opening the top of the camera (flash assembly) to a slight angle.
  • Begin by opening the top of the camera (flash assembly) to a slight angle.

  • Next, angle the flash assembly slightly upward and pry off the connections carefully.

  • Be careful not to damage the ribbon cable. This is essential to the operation of the flash.

Lens Replacement Guide - Steps 5 through 8 need titles

Step 6 - remove first bullet

Step 2 - 3 need titles

Add titles to all steps of all guides

Primary lens replacement guide

Step 4 is not a step review titles for all steps.

hani - Réponse

Proofread your guides carefully.

Dan Brown - Réponse

Slide the action button, on the bottom of the camera, to open the bottom.
  • Slide the action button, on the bottom of the camera, to open the bottom.

Ajouter un commentaire

  • Insert the blue plastic opening tool between the rear case and the plastic tabs directly under the shelf, and pry it loose.

  • Pull off the face plate.

Ajouter un commentaire

  • After the face plate is off, the shutter switch should slide out easily.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Tyler OBrien

Membre depuis le 22/09/2014

501 Réputation

2 tutoriels rédigés

Équipe

USF Tampa, Team 3-5, Brown Fall 2014 Membre de l'équipe USF Tampa, Team 3-5, Brown Fall 2014

USFT-BROWN-F14S3G5

3 membres

6 tutoriels rédigés

where did you get the replacement parts for this?

Jacob Sokolove - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 4

30 derniers jours : 52

Total : 1,447