Réparez vos affaires Communauté Boutique

Porter-Cable 382 On/ Off Switch Replacement

Ce dont vous avez besoin

  1. Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: étape 1, image 1 de 2 Porter-Cable 382 On/ Off Switch Replacement, On/ Off Switch: étape 1, image 2 de 2

    • First, locate the three screws on the top of the sander.

    • Using a screw driver with a size T20 star bit, unscrew the screws by turning them to the left.

    Traduire

  3. Porter-Cable 382 On/ Off Switch Replacement: étape 2, image 1 de 2 Porter-Cable 382 On/ Off Switch Replacement: étape 2, image 2 de 2

    • Locate your on off switch and in order to remove it you must slide it out of its slot.

    • This shouldnt require any special tools, just wiggle the switch up and out.

    • Make sure this is done carefully, the switch is attached to two wires that may break if they are pulled on too hard.

    Traduire

  4. Porter-Cable 382 On/ Off Switch Replacement: étape 3, image 1 de 1

    • Using a spudger such as the one shown, carefully pry open the connectors as shown just enough to slide the prongs of the switch out.

    • Once both prongs are open, the on-off switch can be removed freely and replaced with a new switch.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Nick O'Sadcia

Membre depuis le 03/11/16

421 Réputation

3 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 8-7, Botvin Spring 2016 Membre de l'équipe UMass Dartmouth, Team 8-7, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G7

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 5

Total : 227