Aller au contenu principal

Porter-Cable 382 Sander Pad Replacement

Ce dont vous avez besoin

  1. Porter-Cable 382 Sander Pad Replacement, Sander Pad: étape 1, image 1 de 1
    • When changing the sander pad, be sure to rotate the sander upside down so the pad and three highlighted screws are facing upward toward you.

    • Once the sander is upside down begin by removing your old sandpaper.

    • Once the sandpaper is removed locate the three screws on your sander pad.

  2. Porter-Cable 382 Sander Pad Replacement: étape 2, image 1 de 1
    • Remove the three, (star bolt) screws with the iFixit screw driver with a "T20" head. Be sure to hold the pad of the sander as it will rotate as you try to loosen the screws.

    • Once the screws are removed pull upward toward you and the sander pad will come apart from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Nick O'Sadcia

Membre depuis le 03/11/16

421 Réputation

3 tutoriels rédigés

Équipe

UMass Dartmouth, Team 8-7, Botvin Spring 2016 Membre de l'équipe UMass Dartmouth, Team 8-7, Botvin Spring 2016

UMASSD-BOTVIN-S16S8G7

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 1,660