Réparez vos affaires Communauté Boutique

Porter-Cable PC60TAG Motor Assembly Replacement

Introduction

After a period of time, it is possible that the motor in the Porter-Cable PC60TAG may experience issues, requiring replacement. This guide will demonstrate how this is done.

Ce dont vous avez besoin

  1. Porter-Cable PC60TAG Motor Assembly Replacement, Motor Assembly: étape 1, image 1 de 1

    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips screw on the back cover.

    Modifier

  2. Porter-Cable PC60TAG Motor Assembly Replacement: étape 2, image 1 de 1

    • Holding the front of the device, carefully slide the back cover over the cord.

    Modifier

  3. Porter-Cable PC60TAG Motor Assembly Replacement: étape 3, image 1 de 1

    • Using the Phillips #2 screwdriver, remove the1/2" Phillips screw holding on the motor brush arm. Repeat on the other side.

    Modifier

  4. Porter-Cable PC60TAG Motor Assembly Replacement: étape 4, image 1 de 1

    • Carefully pull the motor brush arm away from the other device, you can leave the wire connected to device. Repeat on the other side.

    Modifier

  6. Porter-Cable PC60TAG Motor Assembly Replacement: étape 5, image 1 de 1

    • Using the Phillips #2 screwdriver, remove the 1 inch black retainer screw.

    Modifier

  7. Porter-Cable PC60TAG Motor Assembly Replacement: étape 6, image 1 de 1

    • Using the Phillips #2screwdriver, remove the 4, 1/2" Phillips screws around the head gear.

    Modifier

  8. Porter-Cable PC60TAG Motor Assembly Replacement: étape 7, image 1 de 1

    • Carefully pull the head gear away from the device, and set aside.

    Modifier

  9. Porter-Cable PC60TAG Motor Assembly Replacement: étape 8, image 1 de 1

    • Using the Phillips #2 screwdriver, remove the two, 1/2" screws holding the head to the body on the bottom side of the grinder.

    Modifier

  10. Porter-Cable PC60TAG Motor Assembly Replacement: étape 9, image 1 de 1

    • Using the Phillips #2 screwdriver, remove the other two 1/2" screws holding the head to the body on the top side of the grinder.

    Modifier

  11. Porter-Cable PC60TAG Motor Assembly Replacement: étape 10, image 1 de 1

    • Holding the head of the device, carefully pull the motor assembly out of the body of the device.

    Modifier

  12. Porter-Cable PC60TAG Motor Assembly Replacement: étape 11, image 1 de 1

    • Using a 9/16" wrench, loosen the spindle nut inside the head, from the motor assembly.

    Modifier

  13. Porter-Cable PC60TAG Motor Assembly Replacement: étape 12, image 1 de 1

    • Pull the motor assembly away from the head.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Mackenzie Fairbanks

Membre depuis le 03/24/16

564 Réputation

5 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 Membre de l'équipe UMass Dartmouth, Team 2-2, Isaacson Spring 2016

UMASSD-ISAACSON-S16S2G2

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 495