Aller au contenu principal

Porter-Cable PC60TAG Power Cord Replacement

Ce dont vous avez besoin

  1. Porter-Cable PC60TAG Power Cord Replacement, Power Cord: étape 1, image 1 de 1
    • Using the Phillips #2 screwdriver, remove the 3/4" Phillips head screw on the back cover.

    • Unplug the grinder before disassembling.

  2. Porter-Cable PC60TAG Power Cord Replacement: étape 2, image 1 de 1
    • Holding the front of the device, carefully slide the back cover over the cord.

  3. Porter-Cable PC60TAG Power Cord Replacement: étape 3, image 1 de 1
    • Using the Phillips #2 screwdriver, remove the two 1/2" Phillips head screws securing the cord grip.

  4. Porter-Cable PC60TAG Power Cord Replacement: étape 4, image 1 de 1
    • Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

  5. Porter-Cable PC60TAG Power Cord Replacement: étape 5, image 1 de 1
    • Careful remove each wire from the power cord from underneath the terminals.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mackenzie Fairbanks

Membre depuis le 03/24/16

564 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 Membre de l'équipe UMass Dartmouth, Team 2-2, Isaacson Spring 2016

UMASSD-ISAACSON-S16S2G2

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 6

Total : 432