Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.
-
Push back the handle after you have taken the core out of the case.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove a total of four screws on the sides of the optical drive.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slowly lift up the optical drive and remove the IDE cable.
-
Remove the power cable.
-
Annulation : je n'ai pas terminé ce tutoriel.
11 autres ont terminé cette réparation.