Introduction
This guide details the removal of the main fan from the fan housing.
Ce dont vous avez besoin
-
-
Pull on outer latch.
-
Lower door until it is level with your work surface.
-
-
-
Remove the screw from each of the two niches on lower part of fan using the Phillips #1 screwdriver.
-
-
-
-
To fully remove the fan, unfasten the 4 screws on the front of the bracing using the Phillips #2 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.