PowerA Enhanced1516953-01 Vibration Motors Replacement

Introduction

Controller vibration is a feature that makes the player feel the action coming from the gaming console that is felt in the hands of the player. The vibrations can be triggered by various actions in the game, such as gunfire, explosions, or crashes. In this guide we are dissembling the controller to get to the vibration motor.

Ce dont vous avez besoin

Étape 1 Rear Case

PowerA Enhanced1516953-01 Vibration Motors Replacement, Rear Case: étape 1, image 1 de 3

PowerA Enhanced1516953-01 Vibration Motors Replacement, Rear Case: étape 1, image 2 de 3

PowerA Enhanced1516953-01 Vibration Motors Replacement, Rear Case: étape 1, image 3 de 3

Lay the controller face down.
Use a Phillips screwdriver to remove the eight 9.2 mm screws that secure the rear case.
Lift the rear case up and off of the chassis.

Traduire

Étape 2 Motherboard

PowerA Enhanced1516953-01 Vibration Motors Replacement, Motherboard: étape 2, image 1 de 3

PowerA Enhanced1516953-01 Vibration Motors Replacement, Motherboard: étape 2, image 2 de 3

PowerA Enhanced1516953-01 Vibration Motors Replacement, Motherboard: étape 2, image 3 de 3

Remove the two 3.3 mm Phillips screws that secure the motherboard to the front case.
Lift the motherboard up and out of the chassis.

Traduire

Étape 3 Vibration Motors

PowerA Enhanced1516953-01 Vibration Motors Replacement, Vibration Motors: étape 3, image 1 de 3

PowerA Enhanced1516953-01 Vibration Motors Replacement, Vibration Motors: étape 3, image 2 de 3

PowerA Enhanced1516953-01 Vibration Motors Replacement, Vibration Motors: étape 3, image 3 de 3

Grip the white vibration motor connectors and pull them straight up and out of their sockets.
Do not pull on the wires.
Gently pull the connector from the pins

Traduire

Étape 4

Remove the four 3.3 mm Phillips screws that secure the motors.
Two screws secure each motor.
Once the second screw is removed on each motor, the vibration motor will immediately release itself. Support the motor while you remove the second screw.