Introduction

Analog stick is one of the main component of the controller, which enables us to move or change camera angle in a game. The following steps will show you how to replace it.

Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver.
  • Remove the (9) nine 9.2mm screws with a JIS #1 screwdriver.

  • Remove the two bottom plastic grip covers.

Ajouter un commentaire

Remove the (2) two 9.2mm screws with a JIS #1 screwdriver.
  • Remove the (2) two 9.2mm screws with a JIS #1 screwdriver.

  • Remove the back cover of the controller.

Ajouter un commentaire

  • Remove the (5) five 9.2mm screws with a JIS #1 screwdriver.

  • Lift the motherboard and let it hang.

Ajouter un commentaire

  • Remove the (4) four 9.2mm screws that are holding the motherboard to the controller.

  • Remove the motherboard.

Ajouter un commentaire

  • Use the tweezers to unclip the four metal teeth of the analog stick.

  • Use the soldering iron to desolder the analog stick sensor module from the back of the motherboard.

  • Place the new analog stick sensor module and solder it back.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Marjan Mehedi

Membre depuis le 27/09/2017

119 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team S14-G4, Boczar Fall 2017 Membre de l'équipe USF Tampa, Team S14-G4, Boczar Fall 2017

USFT-BOCZAR-F17S14G4

4 membres

5 tutoriels rédigés

Hi I’m looking those analog stick but I’m only finding the plastic and they are to big they are called different or something ?

Jose nobkes - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 21

30 derniers jours : 107

Total : 771