Réparez vos affaires Communauté Boutique

PowerA Spectra Infinity Enhanced Faceplate Replacement

Introduction

Use this guide to replace/remove the faceplate of a Power A Spectra Infinity Enhanced Xbox controller.


The faceplate may need to be replaced if it is chipped, cracked, or scratched. Please ensure that the controller is not plugged in before taking it apart.

Ce dont vous avez besoin

  1. PowerA Spectra Infinity Enhanced Faceplate Replacement, Motherboard: étape 1, image 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement, Motherboard: étape 1, image 2 de 2

    • Flip the controller so the back is facing up.

    Modifier

  2. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 2, image 1 de 1

    • Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

    Modifier

  3. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 3, image 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 3, image 2 de 2

    • Unlock the trigger locks before removing the backplate.

    • This will make taking the plate off easier.

    • Use your fingers and carefully remove the backplate.

    Modifier

  5. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 4, image 1 de 1

    • Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

    Modifier

  6. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 5, image 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 5, image 2 de 2

    • Use your hand to separate the motherboard from the face plate.

    Modifier

  7. PowerA Spectra Infinity Enhanced Faceplate Replacement, Faceplate: étape 6, image 1 de 1

    • Remove the buttons from the face plate (d-pad, action buttons, start/select, etc).

    Modifier

  8. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 7, image 1 de 1

    • Remove two 10 mm screws holding the bumper to the faceplate using a Phillips #0 screwdriver.

    Modifier

  9. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 8, image 1 de 2 PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 8, image 2 de 2

    • Remove the single 7.9 mm screw holding the bumpers to the faceplate using a Phillips #0 screwdriver.

    Modifier

  10. PowerA Spectra Infinity Enhanced Faceplate Replacement: étape 9, image 1 de 1

    • Use your hand to separate the faceplate from the bumpers.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Kevyn Jorge

Membre depuis le 03/22/24

1 003 Réputation

6 tutoriels rédigés

Badges: 11

+ 8 badges supplémentaires

Équipe

UMass Dartmouth, Team 6-5, Botvin Spring 2024 Membre de l'équipe UMass Dartmouth, Team 6-5, Botvin Spring 2024

UMASSD-BOTVIN-S24S6G5

3 membres

6 tutoriels rédigés

0 commentaires de tutoriel

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 3

30 derniers jours : 28

Total : 415