Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Close the screen and turn the PowerBook over, orienting the computer upside down, using the label to guide you.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Hold the button on the front left side and slide the battery out.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With a Torx T8 screwdriver, remove the three Torx 24mm screws along the center of the back panel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the computer over and open the display. You should see that the keyboard is loose.
-
Slightly lift the front of the keyboard up, and slide the keyboard towards yourself.
-
Carefully lift the top half of the keyboard and pull it towards yourself.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Loosen the ribbon cables connecting the keyboard to the computer by using a plastic opening tool to lift the tabs on either side of the cable port.
-
Gently remove the ribbons from its tabs.
-
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.