Introduction

Two RAM slots allow up to 1 GB of PC2700 RAM.

Orient the computer so that the side with the line of screws on it is away from you.
  • Orient the computer so that the side with the line of screws on it is away from you.

  • Use your thumbs to push both battery release tabs away so that the edge of the battery lifts up.

  • Lift the battery out of the computer.

Which screw driver I have to use here?

smartvideocanada - Réponse

Phillips #00 Screwdriver: All necessary tools are available to buy at the top of this page if they are needed.

Sam Love -

Remove the three identical Phillips screws from the memory door.
  • Remove the three identical Phillips screws from the memory door.

Ajouter un commentaire

  • Lift the memory door up enough so that you can get a grip on it, and slide it toward you, pulling it away from the casing.

Ajouter un commentaire

  • Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

  • Pull the chip directly out from its connectors. If there is a second RAM chip installed, pop it out in the same manner.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

14 autre(s) ont terminé cette réparation.

Pièces jointes

iRobot

Membre depuis le 24/09/2009

1 Réputation

774 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 2

7 derniers jours : 4

30 derniers jours : 17

Total : 20,025