Aller au contenu principal

PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Hard Drive Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Hard Drive Replacement, Hard Drive: étape 1, image 1 de 1
    • Use the flat end of a spudger to pry the sound card ribbon cable connector up off the logic board.

    • Move the sound card ribbon cable away from the face of the hard drive.

    • It is not necessary to disconnect the sound card ribbon cable from the sound card.

  2. PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Hard Drive Replacement: étape 2, image 1 de 1
    • Use the flat end of a spudger to pry the hard drive ribbon cable connector up off the logic board.

  3. PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Hard Drive Replacement: étape 3, image 1 de 2 PowerBook G4 Aluminum 17" 1.67 GHz (High-Res) Hard Drive Replacement: étape 3, image 2 de 2
    • Remove the following four screws:

    • Three 11.1 mm T8 Torx.

    • One 3.9 mm T8 Torx.

    • Lift the hard drive out of the lower case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,283