Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 9 mm Phillips #2 screws from the base.
-
Once all four screws are removed, take the base off.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Untwist the two orange twist-on wire connectors.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Locate the plastic piece holding the power cord in place.
-
Take the metal spudger from the tool kit and pry this piece loose.
-
Remove the power cord.
-
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.