Introduction
This guide provides the necessary information on fully disassembling the Proline HB25 hand blender.
Ce dont vous avez besoin
-
-
Unscrew the screw on the back of the product.
Demander à FixBot
-
-
-
Pull out the backtab of the housing.
-
Push in the snapfits with, for instance, a screwdriver.
-
-
-
Separate the housing with calibrated force.
-
Use a flathead screwdriver to push out the lower function button.
-
Remove the separating device.
-
-
-
-
Open the housing.
-
Unscrew the circuit board.
-
Unscrew the wire lock.
-
-
-
Push on the side of the housing of the button to push the button out of the housing.
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
Équipe
Delft University of Technology, Team S1-G2, Flipsen Winter 2018 Membre de l'équipe Delft University of Technology, Team S1-G2, Flipsen Winter 2018
TUD-FLIPSEN-W18S1G2
5 membres
1 tutoriel rédigé
