Introduction
If your device will not turn on at all, use this guide to replace your dead or dying battery and make your device functional again.
Ce dont vous avez besoin
-
-
-
Using the flat end of a spudger, carefully separate the battery from the base of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
3 autres ont terminé cette réparation.
2 commentaires
How will I know if my proscan tablet battery is no good once I remove it
there are no screws on my unit ?
Jesse Sanchez - Réponse