Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Blurry photos? Camera not working at all? Use this guide to replace the camera.

  1. Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.
    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

  2. Use the blue plastic opening tool to pry open the tablet.
    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

  3. SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone

    SAUTEZ LA MISE À NIVEAU

    Économisez en réparant avec un kit tout-en-un.

    Fix Kits pour iPhone
  4. With a spudger, flip up the ZIF connector that connects the camera's ribbon cable to the motherboard. This will release the ribbon cable.
    • With a spudger, flip up the ZIF connector that connects the camera's ribbon cable to the motherboard. This will release the ribbon cable.

  5. Remove the black tape holding down the ribbon cable.
    • Remove the black tape holding down the ribbon cable.

  6. Remove camera.
    • Remove camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Laura Kneeshaw

Membre depuis le 12/01/2016

423 Réputation

2 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 182