Aller au contenu principal

ProScan PLT7223G Screen Replacement

Ce dont vous avez besoin

  1. ProScan PLT7223G Screen Replacement, Screen: étape 1, image 1 de 1
    • Remove both 4 mm screws on the top of the tablet with a PH00 screw driver.

  2. ProScan PLT7223G Screen Replacement: étape 2, image 1 de 1
    • Use the blue plastic opening tool to pry open the tablet.

    • You will hear popping sounds. That's okay.

    • Be careful when using the blue plastic opening tool on the side of the device near the speakers, as there is a wire here that connects the speakers to the motherboard.

  3. ProScan PLT7223G Screen Replacement: étape 3, image 1 de 1
    • Remove three 4 mm screws from the motherboard.

  4. ProScan PLT7223G Screen Replacement: étape 4, image 1 de 1
    • Insert a spudger under the black tape that connects the silver wire to the interior of the front panel

    • Pull back the black tape with the spudger until it can be lifted up with your fingers.

    • Use your fingers to grab and lift the remainder of the black tape from device panel.

  5. ProScan PLT7223G Screen Replacement: étape 5, image 1 de 1
    • Use a plastic opening tool to push back the ZIF connector to release the ribbon wire on the motherboard.

  6. ProScan PLT7223G Screen Replacement: étape 6, image 1 de 1
    • Insert an opening tool underneath the silver base of the internal device element.

    • Use the opening tool to pry the element out of the case that holds the screen.

    • You will need to release a number of clips in order to remove the screen.

    • Be careful not to damage the motherboard or battery as you go.

Conclusion

To reassemble your device, follow these instructions in reverse order.

6 autres ont terminé cette réparation.

Nathaniel Girard

Membre depuis le 01/12/16

287 Réputation

2 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 4

Total : 1,816